CRYSTAL WASH How does it work
CRYSTAL WASH produces ultra pure water, demineralized & deionized by the reverse osmosis process plus other sophisticated filtrations, the use is simple and semi-automatic.
Pure quality water considerably reduces the quantity used. With the use of extensible flexible hoses the system maintains a variable pressure and thus makes it possible to reach inaccessible parts with a powerful jet.
The possibility of coupling two systems in parallel on a washing network multiplies the flow rate by two. Depending on the dimensions of the ship, this solution may be recommended.
The system is equipped with a pressure regulator which manages the starting and stopping of the high pressure motor. Thus the water comes out on demand at the outlet of a gun.
- STAINLESS STEEL/INOX, GLASS, GEL COAT, PAINT, VARNISH…
- COMPATIBLE WITH ALL POLISHING OR PROTECTIVE PRODUCTS
- VERY SIMPLE OPERATION
- EASY, NO WIPING OR DRYING REQUIRED
- DRYING BY NATURAL EVAPORATION
DESIGNED FOR LONGEVITY!
Specially designed for daily use and treatment of large quantities of water.
By simply changing the filter every 40 to 60,000 L for a quality ranging from 0 to 7 PPM (particles per million) in most cases and depending on the water inlet quality.
Regular start-up avoids the formation of organic matter which can have an impact on the quality of the water produced and degradation of the semi-permeable membranes.
All our models are equipped with TDS readers allowing a direct reading of the PPM (Particles Per Million), characterizing the concentration of impurities in the water.
The reader provides the quality of the feed water inlet and the quality of the pure water outlet to monitor whether a synthetic sand needs to be replaced.
WE ADAPT OUR SOLUTIONS ACCORDING TO YOUR EQUIPMENT
Our models can be associated in parallel for large units while maintaining the same efficiency.
The flow rate is then multiplied by two and a half, i.e. close to 1500 L/H. This solution is recommended depending on the size of your yacht.